3030
Maintenance:
9.03 Maintenance schedule
No.: Description: Remarks: Page:
Every day
8.6 • Check engine oil level • Observe gauge marking 35
8.7 • Check hydraulic oil level • Oil sight glass 35
• Check hydraulic fi lter element
8.8 • Check fuel level • Sight glass 36
8.12 • Check air fi lter 38
• Diesel engine, see Hatz 2G40 operating manual (Annex)
After 25 hours of operation
• Check all bolts and screws for tightness Tightening torques
8.9 • Replace fuel fi lter 36
• Diesel engine, see Hatz 2G40 operating manual (Annex)
• Replace high-pressure fi lter element
After 75 hours of operation
8.15 • Replace air fi lter cartridge (earlier, if necessary) 40
8.10 • Service the battery Grease the terminals 37
• Note: Diesel engine oil (see Hatz 2G40 operating manual) (see Annex)
Every 100 operating hours
8.12 • Clean or replace air fi lter cartridge (earlier, if necessary) 38
9.0 • Service the battery 43
Every 250 operating hours
• Check the oil level in the travel drives
8.11 • Check all bolts and screws for tightness Tightening torques 41
8.9 • Drain water from diesel line fi lter or replace fi lter 36
8.9 • Inspect all diesel lines for leaks 36
Every 500 operating hours
8.15 • Diesel engine, see Hatz 2G40 operating manual (see Annex) 40
• Change the transmission oil in the travel drives (at least every 6 months)
• Replace high-pressure fi lter element (2nd service)
Every 1000 operating hours
8.14.2 • Change the hydraulic oil (at least 1x per year) 40
• Replace high-pressure fi lter element
8.9 • Replace fuel fi lter (after the 3rd service, at least
1x per year)
36
8.15 • Replace suction fi lter 40
As required
8.16 • Adjust stripper 41
8.11 • Check all bolts and screws for tightness Tightening torques 41
• Engine conservation see Hatz 2G40 operating
manual (Annex)