258
Operation
Trunk
̈ Lift up the interior floor 1 panel at
loop 2.
̈ Fold the outer edges of the interior
floor towards the outside.
̈ Remove the interior floor in direction of
arrow 3.
4 Quick-release fastener
5 Cover
̈ Turn quick-release fasteners 4
anti-clockwise and remove cover 5.
Opening the washer fluid reservoir
1 Cap for windscreen washer reservoir
̈ Pull up cap 1 by the tab.
Closing the washer fluid reservoir
̈ Press cap 1 on to the filler neck until
it engages fully.
For more information, see “Windshield
washer system and headlamp cleaning
system” (
୴ page 401).
i
The quick-release fasteners 4 have to be
merely inserted, not turned, when you close
cover 5.
୴୴
