A SERVICE OF

logo

170
Controls in detail
Transfer case
For more information on off-road driving,
see “Off-road driving” (
page 253).
Transfer case position
Switching transfer case
The transfer case switch is located on the
lower part of the center console.
Transfer case switch
The current gear position of the transfer
case appears in the multifunction display.
1 Transfer case indicator
H HIGH
Road position
L LOW
Off-road position
This position is intended for driv-
ing off-road and step gradients.
The transmission will not upshift
automatically to the next higher
gear range when driving at the
rpm limit.
The transfer case supports the
engine’s driving force
(approximately
1
/
2
speed).
Output is therefore increased.
N Neutral
No power is transmitted from the
engine to the drive axle.