122
Controls in detail
Control system
Instrument cluster submenu
Access the
INSTRUMENT CLUSTER
menu via
the
SETTINGS
menu. Use the
INSTRUMENT
CLUSTER
submenu to change the instru-
ment cluster display settings. The follow-
ing functions are available:
Selecting temperature display mode
̈ Move the selection marker with
the
æ or ç button to the
IN-
STRUMENT CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
TEMP. INDICATOR
.
The selection marker is on the current
setting.
̈ Press æ or ç to set temperature
unit to degrees Celsius (°C) or degrees
Fahrenheit (°F).
Selecting speedometer display mode
̈ Move the selection marker with
the
æ or ç button to the
IN-
STRUMENT CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
DISPLAY VALUES IN
.
The selection marker is on the current
setting.
̈ Press æ or ç to set speedome-
ter unit to
km
or
miles
.
Function Page
Select temperature display
mode
see be-
low
Select speedometer display
mode
see be-
low
Select language 123
Select display (speed display or
outside temperature)
123
