5
ENGLISH
NAMES AND FUNCTIONS OF PARTS
OUT
IN
SYSTEM2
SYSTEM 1 : 4
–16 OHMS
SYSTEM 2 : 4
–16 OHMS
SYSTEM 1
2 : 8
–16 OHMS
SYSTEM1
MODEL NO. PM6002
AC IN
PHONO
GND
OUT
IN
OUT
IN
SPEAKER SYSTEMS
CD-R
MD
TAP E
AUX
DVD
CD
TUNER
RECORDER 1
RECORDER 2
REMOTE
CONTROL
ABC D E F G H I J
REAR PANEL
A PHONO INPUT JACKS
Connect the output jacks of a turntable to these
jacks.
B GND (GROUND) TERMINAL
Connect the grounding wire from the turntable
to this terminal.
C TUNER INPUT JACKS
Connect the output jacks of the tuner to these
jacks.
D CD PLAYER INPUT JACKS
Connect the output jacks of a Compact Disc
player to these jacks.
E AUX/DVD INPUT JACKS
These are auxiliary input jacks which can
be used to connect the audio outputs of AV
components such as DVD players, TV multiplex/
stereo audio tuners, VCRs, and laserdisc
players.
F RECORDER 2 (MD/TAPE) IN/OUT
JACKS
Connect the play (output) jacks and record
(input) jacks of MD or tape decks to these
jacks.
G RECORDER 1 (CD-R) IN/OUT
JACKS
Connect the play (output) jacks and record
(input) jacks of CD Recorder to these jacks.
H SPEAKER SYSTEMS 1 / 2
TERMINALS
Connect your speaker system(s) to these
terminals.
I REMOTE CONTROL BUS
TERMINALS (REMOTE CONT. BUS)
Another item of audio equipment with a remote
control bus terminal can be connected to these
terminals by using a special-purpose cable. The
bus OUT terminal is used to send signals to
another item of equipment. The bus IN terminal
is used to receive signals from another item of
equipment.
J AC IN socket
Connect the supplied AC power cable to this
socket and a power outlet.
