10
Press the POWER button to turn off the VCR. The
r
light
will appear on the display panel. (The
r
light and the Cassette-
Inside light will flash when you turn off the VCR if there is not a
tape in the VCR.) The VCR must be turned off for a timer
recording to take place. Leave the Cable Box/DBS on, if
applicable.
9
Press the OK/STATUS or TIMER button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
will appear on the screen. If PROGRAM NOT COMPLETED
appears, try again from step 1.
Quick Programming (cont’d) 43
9
10
• If the power fails, the VCR keeps your
timer recordings. However, the time
and other menu settings may be lost
if the power fails for more than three
minutes.When the power is restored,
the following will occur:
The VCR will automatically restore the
time setting if you are using AUTO
CLOCK.Auto will flash on the display
panel.When the time setting is
restored, the current time will appear
on the display panel.
After the time setting is restored,
each timer recording you have set will
occur as programmed, unless the
recording was to occur during the
power outage.
Helpful Hint
.......... ..........
