A SERVICE OF

logo

Connect External Power Supply (Optional) 21
E-EQ-MX6PCOGWW-C-ARC MX6 PPC User’s Guide
Connect External Power Supply (Optional)
The MX6 PPC connector is located at the base of the MX6 PPC. The main battery recharges when
the MX6 PPC is connected to an external power source and the “Main Batteries are Charging”
icon is displayed in the toolbar.
Figure 16 AC/DC 12V External Power Supply Kit
Push the 17-pin power cable connector into the MX6 PPC serial port.
When the connector is seated over the pins, twist the cable fasteners to the right to secure the
cable to the MX6 PPC.
Twist to the left to loosen and remove the cable.
Insert the barrel end of the AC/DC Power adapter into the short cable end on the power cord
connected to the MX6 PPC.