12
Installing printer memory
or flash memory
Note: Some memory and firmware options for other Lex-
mark printers cannot be used with your printer.
Refer to the Lexmark T522 Publications CD for
specifications.
1 Follow the steps in “Accessing the printer system
board” on page 10.
Warning! Electronic components can be damaged
by static electricity. Touch something metal
on the printer before you touch the mem-
ory option.
2 Unpack the memory option. Avoid touching the
connection points along its edge. Save the
packaging materials.
3 Open both latches on the connector completely.
Insert the memory option straight into the connector
with the connection points pointing toward the
system board.
4 Push the memory card firmly into the connector until
it snaps into place. Make sure each latch fits over
the notch located on either side of the option card.
5 Follow the steps in “Reattaching the shield and
closing the doors” on page 16.
Memory connector 1
Memory connector 2
Connection points
Latch
Latch
Notch
