A SERVICE OF

logo

2-6 Service Manual
4044-XXX
User Error Message Table
Primary User Error Message Table
When a user error message occurs the printer stops printing and
one or two operator panel LEDs are on solid or blinking until the
printer is powered off. Locate the printers LED Status in the
following table and take the indicated action.
User Error Message LED Status Action
Paper Jam Paper Jam on solid Open cover and clear
any paper jams. Close
the top cover. If the
error message is still
present, go to
thePaper Feed
Service Check on
page 2-24.
Load Manual Paper/
Envelope
Load Paper blinks and
Press Button on solid
Load media into the
manual slot and push
the operator panel
button to resume
printing one sheet or
do an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Load Paper/Load
Envelope
Load Paper on solid
and Press Button on
solid
Load media in the
appropriate paper tray
and push the operator
panel button to
resume printing or do
an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Top Cover Open Error on solid Close the top cover. If
the error LED remains
on solid and POST
does not continue, go
to the Cover Open
Switch Service
Check on page 2-13.