Load up to Make sure
10 iron-on transfers
• You follow the loading instructions that came with the iron-on transfers.
• The print side of the transfers faces you.
• The transfers are loaded in the center of the paper support.
• The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
25 greeting cards
25 index cards
25 photo cards
25 postcards
• The print side of the cards faces you.
• The cards are loaded in the center of the paper support.
• The paper guides rest against the edges of the cards.
Note: Photo cards require more drying time. Remove each photo card as it
exits, and then allow it to dry to avoid ink smudging.
custom-size paper
• The print side of the paper faces you.
• The paper size fits within these dimensions:
Width:
– 76.2–215.9 mm
– 3.0–8.5 inches
Length:
– 127.0–355.6 mm
– 5.0–17.0 inches
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
banner paper
• You remove all the paper from the paper support before loading the
banner paper.
• You tear off only the number of pages needed to print the banner.
• You place the required stack of banner paper behind the printer, and then
feed in the first sheet.
• The leading edge of the banner paper feeds into the printer first.
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
Loading paper and original documents
24
