52 Not enough free space in flash memory for resources
Try one or more of the following:
• Select Continue to clear the message and continue printing. For non‑touch‑screen printer models, press to
confirm.
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
Try one or more of the following:
• Select Continue to stop the defragment operation and continue printing. For non‑touch‑screen printer models,
press
to confirm.
• Format the flash memory. If the error message remains, then the flash memory may be defective and may need to
be replaced.
54 Network [x] software error
Try one or more of the following:
• Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.
• Turn the printer off, wait for about 10 seconds, and then turn the printer back on.
• Upgrade (flash) the network firmware in the printer. For more information, contact customer support.
54 Serial option [x] error
Try one or more of the following:
• Check that the serial cable is connected properly and is the correct one for the serial port.
• Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and on the computer.
• Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.
• Turn the printer power off, and then turn it back on.
54 Standard network software error
Try one or more of the following:
• Select Continue to clear the message. For non‑touch‑screen printer models, press to confirm.
• Turn the printer off, and then turn it back on.
• Upgrade (flash) the network firmware in the printer or print server. For more information, contact customer support.
Troubleshooting 224
