A SERVICE OF

logo

Diagnostic Information 2-5
4044-XXX
Secondary Service Error Codes
For some service error codes, a second service error code is used
to further describe the error. When a service error occurs, pressing
the operator panel button after viewing the primary service error
code displays the secondary service error code. The following table
contains the secondary service error codes.
Blinking Operator Panel LED Action
Fuser Failure - Over Temperature Go to the Hot Fuser Service Check
on page 2-21.
Fuser Failure - Under
Temperature
Go to the Cold Fuser Service
Check on page 2-17.
Fuser Failure - Thermistor Open Go to the Fuser Service Check on
page 2-17.