Korg 88key Manual

A SERVICE OF

next previous

Media utility Formatting media

123

Media utility

Formatting media

Newlypurchasedmediaormediathathasbeenused

byanotherdevicecannotbeused“asis;”youmust

formatthemediabeforeyoucanuseitwiththe

KROME.

Whenyouformatmedia,alldatathathadbeen

savedonthatmediawillbeerased.Besureto

double‐checkmediafordatabeforeyouformat.

Afterformatting,itisnotpossibletopressthe

COMPAREbuttontoreturnto

thepreviousstate.

1. Makesurethatthemediayouwanttoformatis

inserted.Fordetails,pleasesee“Inserting/

removingacardintheSDcardslot”onpage 118.

2. AccesstheMedia–Utilitypage.PresstheUtility

tab.

3. Pressthemenubuttontoaccessthemenu,and

press“Format”toopenthedialogbox.

4. In“VolumeLabel,”usethetexteditbuttonto

accessthetextedit

dialogbox,andspecifythe

volumelabel.

Thepreviously‐specifiedvolumelabelwillbe

displayed.Ifnovolumelabelhadbeenspecifiedforthe

media,orifanon‐DOSmedi

awasinserted,thiswill

indicate“NEWVOLUME.”

5. Specifytheinitializationformat.

QuickFormat:Thiserasesthefileinformationonthe

SDcard,allowingthecardtobeformattedquickly.

Normallyyou’llusethismethodofformatting.

FullFormat:Allblocksonthemediawillbeerased.

Normally,thereisnoneedtoapplyaFullFormat;you

shouldsimplyexecuteQuickFormat.

6. PresstheOKbuttontoformat,orpresstheCancel

buttonifyoudecidetocancel.

WhenyoupresstheOKbutton,amessagewillaskyou

forconfirmation.PresstheOKbuttononceagainto

executetheFormatoperation.

YoumustusetheKROMEtoformatthe media.

TheKROMEwillnotcorrectlyrecognizemedia

thathasbeenformattedbyanotherdevice.

Setting the current time

Specifythedateandtime;thisisusedtorecordthe

correctdateandtimewhenyousavedata.Youcanset

thedateandtimebyusingtheMediaUtilitypage’sSet

Date/Timemenucommand.

TheKROMEdoesnotcontainaninternalcalendar

orclock,youmustusetheUtilitymenucommand

SetDate/Timetosetthedateandtimebefore

savingthefile.

1. PresstheMEDIAbuttontoenterMediamode.

2. AccesstheMedia–Utilitypage.PresstheUtility

tab.

3. Openthemenu,andselecttheSetDate/Time

command.

Thefollowingdialogboxwillappear.

4. UsetheVALUEcontrollerstosetthecorrectyear,

month,day,hour,minute,andsecond.

5. PresstheOKbutton.