Troubleshooting
www.kodak.com/go/support
55
Picture quality problems
Slide Show does not
run on an external
video device.
■ Adjust the camera Video Out setting to NTSC or PAL (see
page 46).
■ Make sure the external device settings are correct. (See the
device’s user guide.)
Computer does not
communicate with
the camera.
■ Turn off the camera, then turn it back on.
■ Make sure the batteries are charged and installed correctly (see
page 2).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (see page 36). Then
turn on the camera.
Status Solution
Picture is not clear. ■ To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■ Clean the lens (see page 61).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size (see page 45).
■ If you’re manually adjusting the ISO speed, realize that high a ISO
setting may cause grainy pictures.
Status Solution
