Processing Options
M100 Film can be processed manually or automatically in a range
of processing cycles.
KODAK INDUSTREX M100 Film
Exposure:
220 kV Direct X-rays with lead screens
Processing:
KODAK INDUSTREX Processor
KODAK INDUSTREX Chemicals
Densitometry:
Di use Visual
Notice: Observe precautionary information on product labels and Material Safety Data Sheets. Develop with rack
and tank, using properly replenished solutions.
1
Contrast calculated between net densities of 1.5 and 3.5.
For More Information
To learn more about KODAK INDUSTREX M100 Film and other
Carestream Health NDT products and solutions, contact a
Carestream Health representative at 877-865-6325 ext 714 or
visit www.carestreamhealth.com/go/ndt.
KODAK INDUSTREX
Processors/Cycles
M43IC—8 min 79°F (26°C)
M43IC—5 min 86°F (30°C)
Base + Fog
0.19
0.19
Contrast
1
5.4
5.25
Developer
KODAK INDUSTREX
Single Part Developer
Replenisher
Temperature
68˚F (20˚C)
72˚F (22˚C)
75˚F (24˚C)
79˚F (26˚C)
Agitation
Intermittent
(5 seconds,
every 30 seconds)
Recommended
Time (Mintes)
5
4
3
2
Carestream Health, Inc. Rochester, N.Y. 14608
© Carestream Health, Inc. 2007. Kodak and the
Kodak trade dress are trademarks of Kodak used
under license.
CAT 137 5617
Exposure:
220 kV Direct X-rays with lead screens
Processing:
Manual; KODAK INDUSTREX Single Part
Developer Replenisher
Densitometry:
Di use Visual
Automatic Processing
See Carestream Health publication TI-2621, Processing
KODAK INDUSTREX Films, for additional information on
automatic processing.
Manual Processing
See Carestream Health publication TI-2643, Guide to Manual Pro-
cessing of KODAK INDUSTREX Films, for additional information on
manual processing.
Develop with rack and tank, using properly replenished solutions.
Film Characteristics (Sensitometric)
ISO/EN exposure conditions: 200/220 kV, lead screens; KODAK INDUSTREX Single Part Developer
Replenisher and KODAK INDUSTREX LO Fixer and Replenisher.
Exclusive manufacturer of Kodak INDUSTREX Products
