ASSEMBL
Y17
Label Installation (for US and CN Mod-
els only)
•
Wipe off any oil or grease from the application
area.
•
Peel the warning label off the backing sheet
and stick it on the rear left guard.
A. Rear Guard (Left)
B. Label For US Models (56070-1285)
C. Label Top
D. 20 mm (0.8 in.)
E. Label For CN Models (56070-1180)
NOTE
żReinstall the right saddlebag after the “Rear
Brake Fluid” and “Rear Shock Absorber” s ec-
tions in the Preparation chapter. When in-
stalling the right saddlebag, see “Left Saddle-
bag” section in the Assembly chapter.
Backrest Pad
•
Assemble the backrest pad, frame, and cover
with the cap nuts (D = 6)(4).
A. Backrest Pad
B. Cover
C. Cap Nut (D = 6)
D. Frame
•
Install the backrest between the brackets with
the flanged bolts (D = 8, L = 50)(4) and the cap
nuts (D = 8).
•
Tighten all the bolts and nuts securely.
A. Ba
ckrest
B.CapNuts(D=8)
C. Bolts (D = 8, L = 50)
Horn
•
Connect the horn lead connectors (BK, BK)
of the harness to the horn terminals at the left
side of the radiator.
A. Horn
B. Connectors (BK, BK)
C. Bracket
•
Install the horn with bracket to the frame with
the bolt (D = 8, L = 12) and tighten it.
