55
Information
Lamp Status List
Status
POWER
(Camera)
Record WPS
POWER
(Pantilter)
Power/Activation
Power off Turns off – – –
Power off (Charging) Blinks slowly – – –
Power on (Activating) Lights Blinks – –
Power on (Activation completed) Lights – – –
Network
Wireless/Wired disabled *
1
– – Turns off –
Attempting connection *
2
– – Blinks slowly –
Connection established *
3
– – Turns off –
Attempting WPS – – Blinks –
Media
No access (Unrelated to the
existence of media)
– Turns off – –
Shooting impossible –
Blinks quickly
(only for 2
seconds)
– –
Accessing media – Blinks – –
Shooting – Blinks – –
Pantilter
Power off (Pantilter) – – – Turns off
Power on (Pantilter) – – – Lights
Pantilter error – – – Blinks quickly
Etc.
Changing the settings Blinks – – –
Resetting Blinks Blinks Blinks –
Updating the firmware Blinks Blinks Blinks –
Formatting media Blinks Blinks Blinks –
*1 Wireless (Access point) mode: No access point is registered.
Wireless (Direct) mode: –
Wired mode : LAN cable is not connected.
*2 Wireless (Access point) mode : The access point is registered, but connection has not been established yet.
Wireless (Direct) mode: No device is connected.
Wired mode : LAN cable is connected and connection has been established.
*3 Wireless (Access point) mode: Connection to the access point is established.
Wireless (Direct) mode: The device is connected to the unit.
Wired mode : LAN cable is connected, and LAN setting has been received from the DHCP
server or LAN setting is fixed.
