15
W
T
W
T
W
T
W
T
W
T
RECORDING
Basic Features
FEATURE: Zooming
PURPOSE: To produce the zoom in/out effect, or
an instantaneous change in image
magnification.
OPERATION: 28X Hyper zoom
Digital circuitry doubles the
maximum 14x magnification offered
by optical zoom.
1)To zoom in, slide the Zoom Lever
toward “T”.
2)To zoom out, slide toward “W”.
NOTES: ●
During Hyper Zoom, the speed
increases the further you slide the
Zoom Lever.
●
Focusing may be come unstable
during Hyper Zoom. In this case,
set the zoom while in Record –
Standby, set manual focus or Focus
Lock (
੬
pg. 22, 23), then zoom in
or out in Record mode.
●
The Zoom Level Indicator (
5
) only
moves during optical zoom. Once
the indicator reaches “T”, all
magnification from that point is
through digital processing.
●
During digital image processing,
the quality of the image may suffer.
FEATURE: Quick Review
PURPOSE: To check the end of the last
recording.
OPERATION: 1)Press “
” and release quickly
during the Record–Standby mode.
• Tape is rewound for about 2
seconds and played back automati-
cally, then pauses in Record–
Standby mode for the next shot.
NOTE:
Distortion may occur at start of
playback.
This is normal.
Zoom-in
Zoom indicator bar
Zoom-out
Zoom level
indicator
Power zoom lever
