ENGLISH
29
Connecting an Audio System
You can use your audio system as front speakers instead of
the front speakers on the TV.
(Terminals on rear)
Connect your stereo amplifier
1
to the AUDIO
OUT terminals.
Turn the TV on and set the volume to the low-
est setting.
Press .
The MENU appears.
Press to choose SOUND SETTING. Then
press .
The Sound Setting menu appears.
Press to choose SPEAKER and press
to choose OFF.
To output sound from the TV speakers:
Set SPEAKER to ON.
Press .
This completes the settings.
Turn the stereo amplifier on and re-adjust the
volume setting, then press to adjust the
volume.
Caution:
Do the following before connecting,
• Turn the power of all the equipment off.
• Set the amplifier volume to low.
• Read the manuals provided with the amplifiers and
speakers.
Notes:
• Use the AUDIO OUT terminals for connecting an audio
system.
The volume output is controlled via the TV and The AU-
DIO OUT terminal output is not interrupted by head-
phone connection.
• Use magnetic-shielded speakers for front speakers
2
to prevent interference by the TV.
1 Stereo amplifier
2 Front speakers (Magnetic-shielded Type, L, R)
1
2
3
OK
4
/
OK
Note:
• Setting the volume of the stereo amplifier too high
may damage the speakers.
/
/
OK
/
eng_AV32-28WFX1EU_P20-34.fm Page 29 Wednesday, February 23, 2000 9:15 AM
