6
Preparation
6 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the “MENU 3” menu. For details, see page 14.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
SETUP TOUR
2 Press the CHANNEL –/+ or the
MENU
/
buttons to select
the on-screen language.
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
EXIT BY
OPERATE BY -+
DISPLAY
3 Press the CHANNEL –/+ or the
MENU
/
buttons to select
the tuner mode (AIR or
CABLE).
SETUP TOUR
TUNER MODE
AIR
NEXT
EXIT BY
OPERATE BY -+
DISPLAY
4 The AUTO PROGRAMMING
function will start and the
indicator blinks.
STOP BY
-+
SETUP TOUR
NOW PROGRAMMING
•To stop the AUTO PROGRAMMING
function, press the CHANNEL m or
the MENU
/
buttons.
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
5 Upon the completion of
AUTO PROGRAMMING
function, the message below
is displayed.
SETUP TOUR
THANK YOU!
SET IS NOW COMPLETE
OFF
TIMER
ECO
SENSOR
COLOR
SYSTEM
CINEMA
SURROUND
MENU
DISPLAY
TV/VIDEO
123
DISPLAY
button
MENU t
buttons
MENU
buttons
CHANNEL –/+
buttons
PICTURE
MODE
CHANNEL
SCAN
CHANNEL
RETURN+ 100+
VOLUME
456
789
0
POWER lamp
Main power button
/
CLOSED
CAPTION
BASS
GGT0018-21VT11-E5 30/6/03, 3:23 pm6
