1 Detergent dispenser drawer
2 Programme selector dial
The programme selector dial is divided into following
sections:
• Cottons,
• Synthetics,
• Delicates
• Wool
/
Hand washing
• Special programmes from “Soak 30°” to “30
Minute wash”
• Reset/Off programme Off
The selector dial can be turned either clockwise or
anticlockwise to select the required wash and drying
programme .
Positions “Economy” correspond to an ENERGY
SAVING programme and “Cold” to a cold wash.
Before setting the dial to any position ensure that the
machine is switched off.
At the end of the programme the selector dial
must be turned to position “Off”.
3 “Spin” button
Press this button repeatedly to change the spin speed,
if you want your laundry to be spun at a speed
different from the one proposed by the washer-dryer
or to select position “None”. The relevant light will
light up.
Spin speed
The following speeds are available for the different
fabrics:
• Cottons, linen:
700/900/1200 max 1400 r.p.m.;
• Synthetics and wool:
700 max 900 r.p.m.;
• Duvet 40°/Delicates 30° and “30 Minute wash”:
700 r.p.m.
Position “None”
By selecting the option “None” all the spinning phases
are cancelled and the machine will not drain the water
of the last rinse, so as not to crease the laundry.
If you select this option with programmes for cotton
and synthetics, the machine will perform some extra
rinses. To be used for extremely delicate items.
At the end of the cycle, the “Start/Pause” button
light will flash, the “Rinse hold” pilot light and the
door locked light illuminate and a static zero will
appear on the display to indicate that the water must
be drained.
To complete the cycle, choose one of the following
options:
• Select programme “Drain” and then depress the
“Start/Pause” button:
The water is emptied out without spinning.
Attention! Before selecting programme “Drain” the
selector dial has to be positioned on Off (cancelling).
• Depress “Start/Pause” button: after emptying,
the machine performs the spin cycle corresponding
to the type of fabric previously selected.
• Turn the programme selector dial to “Off”, select
the programme “Spin”, reduce eventually the spin
speed by means of the relevant button and then
depress the “Start/Pause” button.
The “None” option cannot be selected for the
automatic WASHING & DRYING programme.
