Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 143
Appendix D—Intermec Supplies
Direct Thermal Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Label Label Max Rec. Print Speed
1
Constant Factor Dir 1&3
2
Dir 2&4
3
Top Coated/ Thermal Top Board
4
105 40 100 100
Standard Thermal Top 95 40 150 150
Non Top Coated/ Thermal Eco 90 40 150 150
Standard Thermal Eco Board
4
75 40 150 150
Top Coated/High Thermal Top High Speed 80 40 150 150
Thermal Transfer Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Ribbon Ribbon Label Max Rec. Print Speed
1
Constant Factor Offset Dir 1&3
2
Dir 2&4
3
GP02 TTR Uncoated 80 25 0 150 125
TTR Coated 90 25 0 150 125
TTR Premium 70 25 0 150 125
HP66 TTR Coated 100 25 0 150 150
TTR Premium 85 25 0 150 150
TTR Premium Board
4
105 25 0 100 150
TTR High Gloss White 95 25 0 150 150
TTR Polyethylene 90 25 0 150 150
HP07 TTR Coated 105 25 0 150 125
TTR Premium 95 25 0 150 150
TTR Premium Board
4
105 25 0 150 100
TTR Polyethylene 100 25 0 150 150
TTR Gloss Polyethylene 100 25 0 150 150
HP05 TTR Coated 100 25 0 150 125
TTR Premium 85 25 0 150 150
TTR Premium Board
4
95 25 0 150 150
TTR High Gloss White 80 25 0 150 150
TTR Polyethylene 85 25 0 150 150
TTR Gloss Polyethylene 80 25 0 150 150
HR03 TTR High Gloss Polyester 100 30 0 150 150
1
/. Exceeding the recommended print speed may cause the printhead to wear out prema-
turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by
50 mm/sec.
2
/. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3
/. Applies to ladder bar codes.
4
/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).
