9
Preparing to Connect Your Equipment to the Projector
NOTE: Before you continue,
make sure the projector and your
equipment are turned off. If you’re
connecting a computer, make sure
the distance between it and the
projector is 10 feet or less.
Now you’re ready to connect your equipment. Computers are
connected to the CableWizard. Video players are connected
directly to the projector.
Steps for connecting the different types of equipment are given
on the pages listed below.
NOTE: The computer audio in
connector on the connector panel
is only used with the optional
CableWizard Lite cable. If you are
using CableWizard, the audio
cable should be connected to the
CableWizard, not directly to the
projector.
F
IGURE 6
Connector panel
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
CableWizard. See “Optional
Accessories” on page 48.
Equipment you want to connect Page
Laptop computer with CableWizard page 10
Desktop computer with CableWizard page 12
USB or PS/2 mouse pages 10-11,
page 13
Video player page 14
CableWizard
s-video
composite
video
L/R audio in
audio in
computer
(for video source)
