A SERVICE OF

logo

Open as PDF
next previous
111132_0409 3-7
IMPORTANT: Attach the transport tires before the machine
is loaded or unloaded onto a transport vehicle. Otherwise, the
rear roller and it’s shaft may become damaged.
To load or unload on a transport vehicle use the following
procedure:
1. Make sure the traction drive lever and the cutting reel
drive lever are in the disengaged position.
2. The engine is turned off and the fuel shutoff valve is in
the “closed” position.
3. Use a full width ramp to load/unload the machine.
4. With one person controlling the brake lever, both people
should carefully pull the machine up the ramp and onto
the vehicle.
IMPORTANT: Pull the machine, do not push it, up the
ramp.
5. Secure the machine to the transporting vehicle.