English – 37
MAINTENANCE
Checking the blades
To achieve the best mowing results it is important
that the blades are undamaged and well-
sharpened.
Check that the blades’ attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades
should be conducted by an authorised
service workshop.
IMPORTANT INFORMATION
BioClip 90 and Combi unit 103 should
always have the blades in the relative
position shown in the diagrams with an
angle of 90° between the blades.
Otherwise the blades can go against each
other and damage the unit.
Combi 103
Cutting unit with rear ejection
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
Combi 112
90
°
90
°
Cutting unit with side ejection
BioClip 90
