A SERVICE OF

logo

11
2/05 P/N 211017
Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel
axle (2) with spacers (17) as shown. Insert pole assembly into tank assembly as
shown. Secure bottom pole (6) section to tank and wheel carriage as shown. A
deep socket is recommended.
8
7
6
Install rod (7) through holes in bottom pole section (6) and
eyebolt (8).
2
17
17
3
3
19
9
6
8
7
THE SPACER (17) WILL
FIT LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
IMPORTANT!
DO NOT OVER
TIGHTEN
IMPORTANT!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
5.
4.
1