MTS (Multi-Channel Television Sound) SYSTEM - 17 -
Connect your VCR to your stereo source using the following diagram.
CHECKING THE SELECTED MTS MODE
When you receive a signal from a tape or VCR tuner channel you are
watching, the status shown below will appear when you press the
SELECT button on the remote control.
SAP
Second Audio Program which means your
program is received in a second language.
HIFI High Fidelity which produces a clear sound from two
sources.
1] When a program broadcast in stereo can be received, STEREO
appears on the TV screen.
2] When a program broadcast in second audio can be received, SAP
appears on the TV screen.
3] When a program broadcast both in stereo and second audio can be
received. STEREO and SAP appear on the TV screen.
NOTE: Although a program may be broadcast in both stereo and second audio,
you cannot record in both stereo and second audio at the same time.
4] While VCR is set in HIFI stereo mode. HIFI appears on the TV screen.
While VCR is set in monaural (MONO) mode, HIFI disappears from the TV
screen.
NOTE: If you play non-HIFI tapes while the VCR is set in HIFI, HIFI will
disappear from the TV screen and the VCR play automatically in monaural.
