English - 16 -
FIRST TIME INSTALLATION
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight First Time In-
stallation menu and press the OK button, then you
will be asked to confirm for deleting all channels and
settings.
By selecting YES and pressing the OK button, the
existing channel table will be deleted.
After factory settings is loaded, First Time Instal-
lation menu will be displayed.
Press the OK button to start installation. After search
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Press the OK button to search for analogue
channels.The following menu appears on the screen
for analogue channel search.
Select your Language, Country and Text language by
using
/
and
/
buttons. Press OK button to
continue. To cancel, press BLUE button.
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
the programmes.
If you do not accept the locations and / or the
programme names, you can change them in the Pro-
gram menu.
Configuration
Press the button to display the Main Menu and the
button twice to highlight Configuration, then press
the OK button to display the Configuration menu. Press
the button to leave the menu.
The various configuration functions are displayed in a
list, along with a quarter-screen image of the currently
selected channel. You can select a function by high-
lighting the corresponding menu line using the or
button.
Audio Language
Digital terrestrial television channels can broadcast
simultaneous soundtracks in more than one language.
IB-ENG-(L47VP01U)-MB26 UK-47761W-(RRC1001-2511E)-(ECO PIP)-10056900-50128846.p65 15.05.2008, 13:4216
Downloaded From TV-Manual.com Manuals
