English - 19 -
or button to highlight the Language line and press
the
OK button.
Main Menu
Channel List
Installation
Timers
Language
TV Setup
Common Interface
• Use the or button to highlight the soundtrack
language required and press the
OK button. Normal
viewing, with the required language soundtrack, can
be resumed by pressing the
button.
Languages
English
TV Setup
To be able to go through TV functions, you can use
this item.
The digital TV Setup menu screen is accessed from
the main menu. Press the
button to display the
main menu and use
or button to highlight “TV
Setup”
, press the OK button to display TV Setup
menu screen.
Main Menu
Channel List
Installation
Timers
Language
TV Setup
Common Interface
Detailed information about Sound, Picture and Fea-
ture menus are in
Analogue TV Menu System section
on
page 20.
Common Interface
• Press the button to display the Main Menu and
use the
or button to highlight the “Common
Interface”
line and press the OK button.
Main Menu
Channel List
Installation
Timers
Language
TV Setup
Common Interface
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting.
Obtain the Conditional Access Module (CAM) and the
Viewing card by subscribing to a pay channel com-
pany, then insert those to the Television using the
following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Common
Interface then pressing the
OK button. (CAM set up
menu is not displayed when it is not required.)
• To see the viewing contract information:
Enter IDTV; press the
button, then highlight Com-
mon Interface
and press the OK button.
• When no module is inserted, “
No Common Inter-
face module detected
” message appears on the
screen.
• Refer to the module instruction manual for details of
the settings.
IB-ENG-(L42VP01U)-MB26 UK-42780W-(RRC1001-2511E)-(ECO PIP)-10052018-50121775.p65 16.01.2008, 17:4119
Downloaded From TV-Manual.com Manuals
