SHEET
3
9
D F 0 2 2 - 4 P E - S 1
F
E
D
C
B
A
F
E
D
C
B
A
4
DWG.
No.
(13) External trigger shutter
Mode Fixed shutter
One trigger
VD Sync
Reset control
Input Via Gigabit Ethernet cable (Software trigger)
12-pin connector (Hardware trigger)
Input level 24Vp-p +/- 1V
Threshold 3.7V +/- 0.5V (Low --> High)
3.3V +/- 0.5V (High --> Low)
Input polarity High / Low adjustable
Input delay Adjustable
(14) External sync signal
VD output 5Vp-p +/- 0.3V
Strobe out 5Vp-p +/- 0.3V
Output polarity High / Low adjustable
Strobe delay Adjustable
Strobe duration Adjustable
(15) Partial scan Selectable start position and width of picture grabbing in 2H step.
(16) ALC (Auto level control) Adjustable for video level
(17) White balance ATW / MANUAL / One-push
(18) Gain Auto / Manual (0dB to 18db) (Approx. 0.0358dB step)
(19) Gamma OFF (γ=1) / ON
(20) Color masking OFF / ON (6 vector independent masking)
(21) Paint black Adjustable
(22) Sharpness Adjustable
(23) Black level Adjustable
(24) Knee Adjustable
(25) Power supply voltage DC+12V +/- 1V (input from 12-pin connector)
48V (PoE)
(26) Current consumption Approx. 5.0W (DC+12V)
(27) Ambient
Performance 0 to +40℃ (+32 to +104 F), less than 90 % RH
Operation -10 to +50℃ (+14 to 122 F), less than 90 % RH
Storage -20 to +60℃ (-4 to 140 F), less than 70 % RH (without dew condensation)
(28) Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s
2
), sweep: 1 min XYZ 30min
(29) Shock endurance 490.3 m/s
2
(Drop test, once each top, bottom, left and right)
(30) External dimensions 44(W) x 29(H) x 72(D) mm (not including protrusions)
(31) Mass Approx. 140g
