7K200 SATA OEM Specification
14/173
2 Outline of the drive
・ 2.5-inch, 9.5-mm Height
・ Perpendicular Recording
・ Formatted capacities of 200GB, 160GB,120GB,100GB, and 80GB (512 bytes/sector)
・
SATA Interface conforming to Serial ATA International Organization: Serial ATA Revision
2.6(15-February-2007)
・ Integrated controller
・ No-ID recording format
・ Coding : 199/200
・ Multi zone recording
・ Enhanced
ECC
・ 10 bit 40 symbol non Interleaved Read Solomon code
・ Non interleave On-The –Fly correction
・ Included 2 symbol system ECC
・ Segmented Buffer with write cache
・ 16384 KB - Upper 705 KB is used for firmware
・ Fast data transfer rate
・ HTS7220xxK9A300 model : up to 3.0Gbit/s
・ HTS7220xxK9SA00 model : up to 1.5Gbit/s
・ Media data transfer rate (max):
・ 876 Mb/s
・ Average seek time: 10 ms for read
・ Closed-loop actuator servo (Embedded Sector Servo)
・ Rotary voice coil motor actuator
・ Load/Unload mechanism
・ Mechanical latch
・ 0.8 Watts at idle state
・ Power on to ready
・ 4.0 sec (Typical)
・ Operating shock
・ 3430 m/sec2 (350 G)/2ms
・ 1764 m/sec2 (180G)/1ms
・ Nonoperating shock
・ 9800 m/sec2 (1000 G)/1ms
・ Full Data Encryption as optional (HTS7220xxK9SA00 model only)