Selecting An Input Signal
1
2
Use the zoom ring to adjust the screen
size.
3
Use the focus ring to focus the picture.
Press the INPUT button.
As illustrated below, each time you press the INPUT
button, the projector switches between its input signal
ports. Select the signal you wish to project.
Using the projector’s control button
Press the RGB button.
When this button is pressed, the projector switches to
the RGB port.
Selecting a RGB signal, using the remote control
Press the VIDEO button.
As illustrated below, each time you press the VIDEO
button, the projector switches between its input signal
ports. Select the signal you wish to project.
Selecting a video signal, using the remote control
