HOW TO USE THE REMOTE TO CONTROL YOUR TV
32
Use THUMB STICK ̆ , ̄ , ̇ , ̈ to highlight chosen DATE options.
Press down on THUMBSTICK to select.
Use THUMBSTICK ̈ to highlight START TIME. Use Number buttons to set START TIME (example: Press [0] [4] [3] [0]).
Use THUMBSTICK ̆ , ̄ to highlight AM or PM. Press down on THUMBSTICK to select (example: PM).
Use THUMBSTICK ̈ to highlight FINISH TIME (example; Press [0] [5] [0] [0]).
Use THUMBSTICK ̆ , ̄ to highlight AM or PM. Press down on THUMBSTICK to select (example: PM).
Use THUMBSTICK ̈ to highlight CH# (Channel Number). Use number buttons to enter the channel number to be viewed or recorded
(example: Press [0] [0] [4] [0] [0] [1]).
Use THUMBSTICK ̆ , ̄ to highlight chosen MODE (View or Recording). Press down on THUMBSTICK to select.
When VIEW is selected, a “✓” in the box means it is enabled.
When RECORDING is selected, use THUMBSTICK ̆ , ̄ to highlight a recording device (example: D1 (D-VHS1).
Press down on THUMBSTICK to select.
Press down on THUMBSTICK again to set. The screen below will appear.
Press EXIT to quit the menu.
NOTES: 1. A maximum of 8 programs can be set on EVENT TIMER.
2. EVENT TIMER cannot be set if an invalid channel number was entered.
3. To cancel recording, press [REC] button on remote control first.
4. The GUIDE button will be disabled when EVENT TIMER is activated.
Select EVENT TIMER to set the TV to view or record digital channels from ANT C at the time set. The CLOCK should be set first (see
page 62). When EVENT TIMER is selected, the DATE, START/FINISH TIME, CHANNEL NUMBER and MODE (View or Recording)
can be set individually.
THE REMOTE CONTROL
