A SERVICE OF

logo

E-7
Backup Links
Reactivating the Primary Link
Backup Links
Reactivating the Primary Link
When the primary link is repaired, you can use any of the following methods
to re-enable the primary port:
From the ASCII console, select “Port/Segment Configuration”, then
“Disable and enable ports option”, then enable ports.
From CiscoView, re-enable the primary port. See the network manage-
ment product documentation for details on how to enable a port.
Power-cycle the hub.
When the primary port is re-enabled, the backup port is automatically disabled
and returned to backup mode.
MUCHO.BK : CE.FM5 Page 7 Thursday, June 26, 1997 11:37 AM