8. Close the print cartridge door.
9. If the print cartridge alignment sheet prints, load it on the left front corner of the glass
with the top of the page to the left.
10. Press the Scan button.
The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge
alignment sheet.
Related topics
•
Check the estimated ink levels
•
Control panel buttons
Use ink-backup mode
Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The
ink-backup mode is initiated when a print cartridge is removed from the print cartridge
cradle.
NOTE: When the HP All-in-One operates in ink-backup mode, a message is
displayed on screen. If the message is displayed and two print cartridges are installed
in the device, verify that the protective piece of plastic tape has been removed from
each print cartridge. When plastic tape covers the print cartridge contacts, the device
cannot detect that the print cartridge is installed.
Work with print cartridges 65
Maintain the HP All-in-One
