Preparation
36" All-Refrigerator and All-Freezer Units
Refrigerator/
freezer
location
Do not instell the refrigeretor/freezer where
temperetures will be below 60°F(16°C}because
it will not run often enough to maintain proper
temperatures, and the refrigerator will develop
high internal humidity.
For proper instelletion, the refrigeretor/
freezer must be pieced on e level surface
of herd meteriel the seme height es the rest
of the flooring. This surface should be
strong enough to support e fullg Ioeded
refrigeretor/freezer, or epproximetelg
1,200 Ibs.eech. See the Instelletion
Instructions for complete directions.
Clearances
If the refrigerator/freezer isto be installed in
a corner, a 4" clearance is required on the hinge
side for a 90°door opening and access to fresh
food drawers. A 15" clearance is required on
the hinge sideto remove pans. A 25"clearance
is required on the hinge sidefor a full 130°
door swing.
Noother clearances attop, sides or back
are required. See the Installation Instructions
for complete directions.
Anti-tip
bracket
The unit is top-heavg and must be secured
to prevent the possibilitg of tipping forward.
An anti-tip bracket must be installed to secure
this unit to the wall. The following pages show
the installation of this bracket.
15
