71
Menus
Using the Menus: Shooting Mode
v
DISP. CUSTOM SETTING
Choose the items displayed in the optical view nder or in the electronic view nder and LCD monitor (P 21). The following items
can be displayed: framing grid (you can also select the grid type as described on page 71), virtual horizon, focus distance (auto or
manual), histogram, exposure (shutter speed, aperture, and sensitivity), exposure compensation/exposure indicator, metering,
ash mode, white balance, lm simulation, dynamic range, number of exposures remaining, image size and quality, and battery
level. See pages 6 – 8 for the locations of these items in the displays.
1
Highlight OVF or EVF/LCD and press MENU/OK.
2
Press the selector up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when settings
are complete.
Virtual Horizon
Selecting
ELECTRONIC LEVEL
displays a virtual horizon. The camera is level when the two lines over-
displays a virtual horizon. The camera is level when the two lines over-
lap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P
c
FRAMING GUIDLINE
(
defaults to
F
GRID 9)
Choose the type of framing grid available in shooting mode.
F
GRID 9
G
GRID 24
H
HD FRAMING
P P P
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the
lines at the top and bottom of the display.
