22 Printing Without a Computer
3. Select from these options, then press OK:
■ P.I.M.: Uses your camera’s PRINT Image Matching or Exif Print settings (this option
is automatically selected when your pictures contain P.I.M. data).
■ Exif: Uses your camera’s Exif Print settings (this option is automatically selected when
your pictures contain Exif Print data).
■ PhotoEnhance: Adjusts the brightness, contrast, and saturation of your photos. For
example, if you have a photo with a subject that is too dark because of a bright
background (backlighting), PhotoEnhance
™
might be able to improve the brightness
levels so that the person’s face is brighter in the printout. (The PhotoEnhance face
lighting adjustment works best with faces that take up a significant portion of the
photo, and where both eyes are visible.)
■ None: Select this if you don’t want to use P.I.M., Exif, or PhotoEnhance.
Note: These settings remain in effect until you change them. To reset all settings to the
defaults, see page 28.
To make manual adjustments in addition to the automatic ones, follow the steps in the next
section.
Manually Adjusting Your Photos
1. Press the Print Setting button.
2. Press d or
u to choose one of these options, then press the r button:
■ Quality: Choose Standard, Higher, or Highest
■ Filter: Choose Off, Black & White, or Sepia
■ Brightness: Choose Standard, Brighter, Brightest, Darker, or Darkest
■ Contrast: Choose Standard, Higher, or Highest
■ Sharpness: Choose Standard, Sharper, Sharpest, Softer, or Softest
■ Saturation: Choose Standard, Higher, Highest, Lower, or Lowest
■ Density: Available for CD/DVD printing; choose Standard, Darker, or Darkest
3. Adjust any settings as necessary, then press OK.
Note: These settings remain in effect until you change them. To reset all settings to the
defaults, see page 28.
Pbasics.book Page 22 Monday, August 1, 2005 12:31 PM
