A SERVICE OF

logo

Open as PDF
next previous
4. Now using Table 2, select your transmission code: ASCII or Baudot.
A. If ASCII is selected, refer to Table 4 for word length setting and parity control.
B. If Baudot is selected, refer to Table 5 for selection of correct Baudot code.
5. Set Line Spacing to desired position.
6. Set Auto Feed if required. This is necessary if the host system does not transmit
line feed control code.
Details of the coding structures are contained in Appendix A for ASCII and Appendix
B for Baudot.
Table 3 Baud Rate Selection
Note: 1 = ON
Table 4 ASCII Code Table Selection
Pin No.
Function
A2
Data Length
A3 Parity Check
A4
Parity
off
8 bit
Enable
Even
On
7 bit
Disable
Odd
Factory-set
ON
ON
ON
Table 5 BAUDOT Code Table Selection
SW A2
SW A3 SW A4
CODE TABLE
ON
ON
ON
CCITT #2
OFF
OFF
ON CCllT #2 AMERICAN
ON
OFF ON
WU/TELEX
-11-