With the *Change Macro mode you
always change
the current
settings. As soon as you choose and set a different option, that
new
choice becomes a current printer setting.
Changing
the current settings
There
are two ways to change the current settings.
l
You can use the DRAFT and LQ buttons on the control panel to
change print quality or font, as described in Step 5, Chapter 1.
l
Y
OU
can use the *Change Macro mode to change the current settings
without saving the settings to a macro.
To charge the current settings, follow these steps.
1. From the SelecType main menu, press
MENU
until the display
shows [*CHANGE MACRO].
2. Press
SETTING
to see the printer settings listed in Table 2-1.
3. Select a setting you want to change, then press
OPTION
to display the
options for that setting.
2-10
SelecType
