3
Printing on Single Sheets 3-13
R4C3430
Rev. C
A5 size CHAP3.FM
3/23/99 Pass 0
R
Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
7. You may need to check and change the printer driver settings
as described in Chapter 4. Then send a print job to the printer.
When the printer receives data, it prints the page and ejects it onto
the paper guide on top of the printer. To continue printing your
document, remove the printed page and insert a new sheet of
paper in the front paper guide. If you need to eject a sheet, press
the Load/Eject button.
If the first line on your page appears too high or low, you can fix
this using the micro adjust feature. See “Adjusting the Top-of-
Form Position” on page 2-39.
c
Caution:
Never use the knob to adjust the top-of-form position or eject a
sheet when the printer is on; this may damage the printer or cause
it to lose the top-of-form position.
