Rev. B Product Overview 1-5
TM-L90/TM-L90 with Peeler Technical Reference Guide
1.2.3 Control Panel
FEED button (with TM-L90)
Pressing the FEED button feeds the roll paper.
The printer paper feed depends on the line feed amount set. However, in the following cases,
FEED cannot be used for paper feed.
• When the roll paper cover is open
• When performing cleaning
• When performing self-testing (Press the FEED button to stop self-testing and press it
again to resume it.)
• When the FEED button has a defined function in a macro definition command.
(When using ESC/POS commands)
FEED button (with the TM-L90 peeler specification)
FEED has the following 3 functions.
• Feeding roll paper
• Initializing the mechanism
(After closing the roll paper cover, the status changes to waiting to print when FEED is
pressed)
• Recovering from errors
❏ Feeding roll paper
The printer paper feed depends on the line feed amount set. However, in the following cases,
FEED cannot be used for paper feed.
• The roll paper runs out
• When the roll paper cover is open
• When waiting for label removal
• When waiting for FEED to be pressed
• When an error occurs
ERROR LED
PAPER OUT LED
FEED Button
POWER LED
