Epson 8500 Manual

A SERVICE OF

next previous

5. Hold the perforation cutter by its handle with the connector

facing to the right. Then lower the perforation cutter into

the space at the back of the printer, fitting the pins on the

sides of the perforation cutter into the notches in the printer.

6. After the perforation cutter is in place, push back the

perforation cutter handle flat. Then close the top cover.

7. Plug the perforation cutter’s connector securely into the

connector inside the printer.

6-1

6-14-An

6

R

Peony Rev.C

A5 size Chapter 6

98/01/07 Pass 4

Using Printer Options 6-15