Cooking zone safety switch
13
Automatic pan sensing
Pan and triple ring sensing is automatically activated when the cooking
zone is switched on.
If a cooking zone button is pressed, but there is not a suitable pan on
the cooking zone, or the pan is too small,
f
(Fault) appears in the dis-
play. This is also displayed in the case of overheating, faults in the elec-
tronics or for safety reasons.
Automatic triple ring sensing
The outer or middle ring is switched on, or is switched off, depending
on the size of the pan.
1 Cooking zone safety switch
If, after a set period of time, one of the rings is not switched off or the
heat setting not changed, the cooking zone switches off automatically.
j
, or
h
appears in the displays of all the rings that are switched on.
The rings are switched off at:
• Heat setting 1 - 2 after 6 hours
• Heat setting 3 - 4 after 5 hours
• Heat setting 5 after 4 hours
• Heat setting 6 - 9 after 1.5 hours
Resetting the safety switch
0
To reset the safety switch on
all
cooking zones switched on, switch the
appliance off and on again at the main button. The cooking zones are
then ready for use again.
3
h
appears in the ring display when there is still heat remaining.
