A SERVICE OF

logo

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
553
63-23 enable snmp traps
Description
This command is used to enable SNMP trap support.
Format
enable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP trap support:
DES-3200-28/ME:admin#enable snmp traps
Command: enable snmp traps
Success.
DES-3200-28/ME:admin#
63-24 disable snmp traps
Description
This command is used to disable SNMP trap support on the Switch.
Format
disable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the Switch: