IPv6 Routing Commands 789
Default Configuration
IPv6 PIM-DM is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimdm
ipv6 pimdm hello-interval
The ipv6 pimdm hello-interval command is used to configure the PIM-DM
Hello Interval for the specified router interface. The Hello-interval is to be
specified in seconds. Use the "no" form of this command to reset the hello
interval to the default.
Syntax
ipv6 pimdm hello-interval
interval
no ipv6 pimdm hello-interval
• interval - The hello interval time in seconds (Range: 0–65535).
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
