912 OSPF Commands
Example
The following example displays the information for the IFO object or virtual
interface tables associated with VLAN 3.
console#show ip ospf interface vlan 10
IP Address.......................... 1.1.1.1
Subnet Mask......................... 255.255.255.0
Secondary IP Address(es).............
OSPF Admin Mode...................... Enable
OSPF Area ID......................... 0.0.0.0
OSPF Network Type.................... Broadcast
Router Priority...................... 1
Retransmit Interval.................. 5
Hello Interval....................... 10
Dead Interval........................ 40
LSA Ack Interval..................... 1
Iftransit Delay Interval............. 1
Authentication Type...................None
Metric Cost...........................10 (computed)
Passive Status....................... Non-passive interface
OSPF Mtu-ignore...................... Disable
State........................... .... designated-router
Designated Router.................... 1.1.1.1
Backup Designated Router............. 0.0.0.0
Number of Link Events................ 2
