A SERVICE OF

logo

4. Turn over the display panel, placing it on a clean surface.
5. Gently pull the pull-tab on the bottom flex-cable connector to release the cable from the inverter board.
6. Lift the tape that secures the top flex-cable connector and disconnect the connector.
Back to Contents Page
NOTICE: To avoid damage to the computer when replacing the bottom flex cable, gently support the bottom of the inverter board with one finger as
you reseat the bottom flex-cable connector. Do not bend the inverter board.
1
pull-tab of the bottom flex-cable
connector
2
back of display panel
3
flex-cable
4
tape securing the top flex-cable
connector