• Dell.Configuration.Perform vCenter-Related Tasks
– Exit and enter maintenance mode
– Get the vCenter user group to query the permissions
– Register and configure alerts, for example enable/disable alerts on the event settings page
– Post events/alerts to vCenter
– Configure event settings on the event settings page
– Restore default alerts on the event settings page
– Check DRS status on clusters while configuring alerts/events settings
– Reboot host after performing update or any other configuration action
– Monitor vCenter tasks status/progress
– Create vCenter tasks, for example firmware update task, host configuration task, and inventory task
– Update vCenter task status/progress
– Get host profiles
– Add host to data center
– Add host to cluster
– Apply profile to host
– Get CIM credentials
– Configure hosts for compliance
– Get the compliance tasks status
• Dell.Inventory.Configure ReadOnly
– Get all vCenter hosts to construct the vCenter tree while configuring connection profiles
– Check if the host is a Dell server when the tab is selected
– Get the vCenter's Address/IP
– Get host IP/Address
– Get the current vCenter session user based on the vSphere client session ID
– Get the vCenter inventory tree to display the vCenter inventory in a tree structure.
• Dell.Monitoring.Monitor
– Get host name for posting the event
– Perform the event log operations, for example get the event count, or change the event log settings
– Register, unregister, and configure events/alerts – Receive SNMP traps and post events
• Dell.Configuration.Firmware Update
– Perform firmware update
– Load firmware repository and DUP file information on the firmware update wizard page
– Query firmware inventory
– Configure firmware repository settings
– Configure staging folder and perform update using the staging feature
– Test the network and repository connections
• Dell.Deploy-Provisioning.Create Template
– Create, display, delete, and edit deployment templates
• Dell.Configuration.Perform Host-Related Tasks
14
