Cookshack Model 066 8 Ver.06.1
1-800-423-0698 www.cookshack.com info@cookshack.com
Setting Cook Time and Temperature
Use the instructions and controller picture below for setting the smoker in
the proper cooking mode.
Normal Cooking Mode
1. Turn On/Off switch to the on position.
The screen should display the word OFF in the probe position.
2. Cook Temperature
To set the cook temperature, press and hold the temp button until the
controller beeps twice. Press the up or down arrows to adjust the cook
temperature (arrows must be pressed within two seconds of the two
beeps).
3. Cook Time
To set the cook time, press and hold the time button for two beeps.
Press the up or down arrows to adjust the cook time (arrows must be
pressed within two seconds of the two beeps). This will change the
hours. Press the time button again or wait two seconds to change the
minutes.
4. Press the Start button to begin cooking.
The screen should display Time, Temp, and No Probe.
Probe Cooking Mode
1. Insert the probe into the probe jack, then turn the On/Off switch to the
on position.
The screen should display the word OFF in the time position.
2. Cook Temperature
To set the cook temperature, press and hold the temp button until the
controller beeps twice. Press the up or down arrows to adjust the cook
temperature (arrows must be pressed within two seconds of the two
beeps).
3. Probe Temperature
To set the probe temperature, press and hold the probe button until the
controller beeps twice. Press the up or down arrows to adjust the probe
temperature (arrows must be pressed within two second of the two
beeps).
4. Press the Start button to begin cooking.
The screen should display Temp and Probe Temp.
